Maintenance and care of the machine
Time: 2022-06-01 10:08:39
a. Do not touch the heat plate when the machine is on or after use. The plate can get very hot. Allow ample time for the plate to cool after use.
b. Do not let the power cord touch the heating plate.
c. Do not set the temperature above 400℉ / 210℃ for an extended period of time, this will help extend the life of the machine.
d. Keep the machine dry, do not store it in an area with high humidity.
e. Ensure the machine is fully cooled before moving, packaging, or storing
f. Turn off for 15 minutes after 4 hours of continuous use.
g. Don’t operate other high-power equipment on the same circuit.
h. Do not disassemble the heat press.
i. Please do not operate the heat press with a damaged cord or if the equipment has been broken.
j. Please do not immerse the heat press in water or other liquid.
k. In case of thunderstorms/adverse working conditions, please turn the machine off and unplug it from the outlet.
l. When not in use, store heat press open.
Suggested Temperature Time
| Substrate | Temperature | Time(s) | Attention |
| Ceramic Mug | 360°F/180°C | 120-170 Seconds | Sublimation Paper, Sublimation Ink, Print Mirror Mode, Moderate Pressure |
| Glass Beer Cup | 360°F/180°C | 150-180 Seconds | Sublimation Paper, Sublimation Ink, Print Mirror Mode, Moderate Pressure |
| Aluminum Bottle | 340°F/170°C | 25-30 Seconds | Sublimation Paper, Sublimation Ink, Print Mirror Mode, Low Pressure, Remove Cap |
| Stainless Steel Bottle | 340°F/170°C | 30-35 Seconds | Sublimation Paper, Sublimation Ink, Print Mirror Mode, Moderate Pressure |
| Heat Resistant Plastic Cup | 230°F/110°C | 25-30 Seconds | Sublimation Paper, Sublimation Ink, Print Mirror Mode, Low Pressure |
Place the cup in the middle of the mug attachment for evenly distributed heat.
